The brand seal, composed of a plastic part and a textile/thread part, is presented with the ends embedded during the moulding operation in the base of a prismatic plastic box which is placed in a linear extension with the thread, and is provided with two snap-in windows, one on each side of the box, in order to receive the coupling of the opposite end of the thread.

For the manufacture of this plastic seal we can use different types of threads depending on the appearance we want to achieve. Although it is usual to inject the plastic on polyester thread, it is also possible to do it on natural or rustic-looking threads such as hemp or cotton. For an even more elegant finish, we can use a 3 mm tubular ribbon specially made for the manufacture of marquees.

The length of the thread or ribbon has plastic nibs at the ends and is variable in length.  The length of the thread and ribbon is usually 270mm. However, the length can be varied: 160mm, 180mm, 230mm, or 320mm so that the label hangs less or more from the garment on which it is placed.

The thread is served open on both sides, i.e. it is served WITHOUT BAG. One end will be hooked to a loop, collar tag or buttonhole and the other end is intended to crimp the label. The safety pin that we insert in the box will always be made of plastic.

The plastic body is always placed in the centre of the thread, it can be of different colours and is marked in one or two colours with the customer’s brand or logo by thermal engraving. There is also a colour range for the embossing film with colours such as shiny or matt gold and silver.

3D circular or rectangular plastic seals.

It is a tamper evident monoblock plastic seal manufactured in a single process.

The rectangular seal is characterized by its plastic body with 4 sides of 5x9mm with volume, it is possible to personalize one of the sides to a pantone colour by means of typography.

The circular plastic seal is characterised by a 9mm long plastic cylinder which is injected on the polyester thread with a length of 270mm. The personalisation of the same as in the rectangular seal is carried out in one Pantone colour by means of pad printing.

This plastic tag is normally injected on polypropylene yarn, but it is also possible to inject it on natural or rustic looking yarns such as hemp or cotton.

The length of the thread will always be 270mm and cannot be varied, and the plastic body is in the middle of the thread. The thread is served open on both sides. The safety pin in this series is always made of plastic.

Why choose Adenea for your seals – Manual threads?

The truth is that we are leaders in the sector, so if you would like a trustworthy brand, Adenea is your place. On the other hand, there are many reasons to choose us as a label creator company, but we are going to detail the most significant and representative of our brand.

Quality in our results

We always strive to give the best quality to our customers.

You will feel supported and understood by our team.

The materials we use are also impregnated with this quality. We are versatile and know how to work with both physical and digital brands.

Industry experience

We have been helping brands to create their labels and branding for many years. From this, we already have key experience that will make the consultancy process very easy.

We will find the ideal material and formula to add the labels that best suit your company.

Commitment to our customers

At Adenea we have a fluid and continuous communication so that our clients are aware of the whole process. We know how important it is to protect every detail of the brand, so we have the guarantee of achieving our social, environmental and ecological responsibility.

Ecology in our products

It is becoming a priority for companies to preserve their environment. That is why good materials that respect the planet are increasingly in demand. So, working with us is a safe bet, because we work with materials that have these characteristics.

Especially if you belong to the textile industry you will know how important it is to change many things, ecologically speaking. What’s more, customers already take into account which brands are reducing this damage to the environment.

We can advise you on how to make your eco-labels and what our recommendations are.

Get in touch with us

We have different ways to reach us, because there is our telephone (963667444) where our team of professionals will take care of collecting the information for that first contact. But we also have a physical location (C/ Ministro Luis Mayans 35-1, 46009 Valencia) and, if you prefer, an e-mail address (

Now all that remains is for you to contact us and together we will continue working to bring prestige to your brand!

Request a non-binding quote